Best Bricklayers Corner Blocks

Bricklayers Corner Blocks

Bricklayers Corner Blocks have been used for generations.

They were first made from wood and usually made by a joiner and carpenter or designed by the bricklayer.

They were cut from a square piece of timber and notched out so the line can sit inside the block and be wrapped around to secure the line.
These days, bricklayers corner blocks are made professionally. As a result, they last longer and are specially designed for performance.

The Bricklayers corner block is used to attach the bricklayer’s line to and wrap around, so the bricklayer can run in and build plumb and level.

The Bricklayers corner block is attached to the line, and the line is pulled tight.

The corner block sits on the brick or blockwork or the profile, leaving a nice tight line to wall to.

How To Use a Bricklayers Corner Block

Table of Contents

The Bricklayers corner block is designed to attach the bricklayer’s line to and wrap around, so the bricklayer can run in and build plumb and level masonry.
The Bricklayers corner block is attached to the line, and the line is pulled tight.
The corner block sits on masonry or the bricklayer’s profile, leaving a nice tight line to wall the brick or blockwork to.

To attach and use the bricklayer’s corner block, a bricklayer has to build a corner first so the corner block can grip it. Also, the bricklayer’s corner block can sit on a bricklayers profile. The profile is attached with bricklayers clamps leaving no need to build a corner.

Footprint 624 Line Corner Blocks Our Pick

Footprint Line / Corner Blocks are made from tough engineering grade plastic made in Britain.

The window allows visibility of gauge markings on profiles and checks the line hasn’t snagged. Easy to grip even with gloves or with wet hands. Narrow channels to hold the line tight.

Less than 50mm on either side so that it can fit 50mm box section profiles. Used in conjunction with bricklayers Line Pins and bricklayers line.

Made in Britain
Pair of line blocks for use holding a line tight to lay bricks to
Window to check gauge markers on profiles
Window in the corer block to see the gauge marks
Narrow channels to hold the bricklayers line tight
Easy to grip, even in gloves
50mm sides, suitable for 50mm Box section profiles

OX OX-P101801 Bricklaying Tool – Rubber Corner Block – Line Blocks

The OX Rubber Line Block is sturdy and is often used to suspend a brick line between two points on a brick wall. The Rubber line block helps to take a brick line around a 90-degree angle as it is lightweight.
Rubber line block fits smoothly to help accurate bricklaying and grips to provide further power in vigorous site conditions. The high strength rubber material enhances the longevity of the tool.
The OX Rubber Line Block fits smoothly to help accurate bricklaying. Bricklayers frequently use line blocks as an aid to keeping brick walls horizontally level as they are constructed.
A building line block is a small, roughly “L” shaped block specially made with a rubber surface & grooves to secure a brick line.
Developed in conjunction with some of Australia’s leading bricklaying contractors. This attention to detail is why OX is found in several bricklayers toolkits.

Spear & Jackson Rubber Blocks and Line, Orange

The Spear & Jackson Rubber Line Blocks and Brick Line pack contains a pair of rubber line blocks and a 30-metre high visibility brick line.

The lightweight and easy to use blocks are angled at 87.5 degrees so that when under tension, they square up into the corner of the brick for a better grip and more stable line.

The grooved rubber surface of the block prevents slippage whilst in use, and the blocks are highly visible, making them easy to see and not so easy to lose.

Rubber surface and grooves to prevent slippage
Blocks angled at 87.5 degrees – when under tension, they square up into the corner of the brick
Lightweight and robust construction
Highly visible fluorescent colours – easy to see, not so easy to lose

Marshalltown M/T86P M86P 86p Plastic Line Blocks

The plastic line blocks and twigs are highly visible and impervious to water, allowing you to work in a number of conditions.
Perfect for providing a guideline so you can lay bricks perfectly straight and level
The twigs are used to keep the mason’s line from sagging between the blocks
Pack contains: 2 line blocks (5 x 2 1/4″) and four-line twigs
Manufactured in the USA using top quality materials and equipment to ensure superior products

Marshalltown Classic Hardwood Line Blocks (2)

Pair of hardwood Marshalltown line blocks old school classic style and look.

The Marshalltown wooden line blocks get the job done and have been used for decades. The simple line block is perfectly designed to grip brick and block work letting the mason run in the brick and blockwork easily.